4. Input & Communication
4. INPUT & COMMUNICATION
About this chapter
This chapter describes the functionality of the Local Keypad, the projector Status Light (tail light) and the different input and commu-
nication ports of your Thor.
Note that all information about the ICMP is gathered into one separated chapter: "ICMP", page 31.
Overview
•
•
•
•
•
4.1
Introduction
General
The Input & Communication side of the Thor consists of a Local Keypad integrated into the projector housing and a card cage with
three slots. The rear side of the projector is equipped with a tail light which re
fl
ects the status of the projector. The laser status light
is located on the top side of the projector.
The projector card cage is equipped with an ICMP. See illustration below. Note that all information about the ICMP is gathered into
one separated chapter: "ICMP", page 31.
2
1
3
4
5
6
7
Image 4-1
1
Lasers status light.
2
Projector status light.
3
Communication port with Chillers.
4
Local keypad.
5
ICMP.
6
Barco Cinema Controller.
7
Switch Mode Power Supply (SMPS) for projector electronics (not lasers)
C
AUTION
:
A unit may only be removed from the card cage by quali
fi
ed service personnel. Removing one of
the boards (except for the Cinema Controller or SMPS) will result in an authorization request upon starting.
4.2
Projector Status
About the projector Status Light
The projector Status Light is located at the rear side of the projector (reference 1 image 4-2). The projector Status Light is a real
time indicator of the projector condition.
R5906787 THOR 26/01/2018
23
Summary of Contents for Thor
