Barco Thor, User Manual, Page: 29 / 76

4. Input & Communication
2
Image 4-3
Status overview
The Laser Status light has only one color: white. The combination of the Laser Status light and the backlight of the Power On/Off
button on the Local Keypad indicates a certain condition of the projector. See table below.
Status Light Light Button Meaning
Off Continuous white or off Sealed compartments are DECONDITIONED. Lasers are not activated (it
is safe for service personnel to open the compartments).
Blinking
(6 seconds)
Blinking green Indicates the start of the CONDITIONING process. After six seconds the
status light will light up continuously.
Blinking green Ongoing CONDITIONING process. Lasers are tested
Continuous green Sealed compartments are fully CONDITIONED. Lasers are activated for
image projection.
On
Blinking white Ongoing DECONDITIONING process. Lasers can be active on low power.
Slow blinking Continuous white
or red
Not safe to open the sealed compartments due to risk of condensation.
The external dew point of the boot area is too high.
Wait until the status light turns off and remains off.
4.4 Local Keypad
Identi fi cation of the buttons
DOWSER
1 4
2 5
3 6
ZOOM ZOOM
FOCUS
SHIFT SHIFT
2 1 3 4 5 6 7
8 9 10 11 12
Image 4-4
R5906787 THOR 26/01/2018 25