5. ICMP
Image 5-18
3. Insert the HDD into the HDD slot. Ensure that the handle is suf
fi
ciently open so that the hook (reference 1) of the handle can
pass the front plate of the ICMP.
1
Image 5-19
4. Push the HDD completely and
fi
rmly inside its slot, close the handle, and move the latch towards the right.
Image 5-20
5. Switch on the projector.
In case you replace one HDD (e.g. degraded mode) the ICMP automatically starts with the RAID recovery
process. The red LED of the HDD which has to be rebuilt is blinking. This process takes about 200 GB per
hour. Once the RAID is completed the red LED turns off.
C
AUTION
:
It’s strongly recommended to complete the RAID recovery process prior to starting a show. This
to ensure that the content integrity is preserved and that the show is not interrupted.
54
R5906787 THOR 26/01/2018
Summary of Contents for Thor
