Barco TF-10, Installation Manual

Page: 41 / 62

5. Cabling of an TF-10 display
5. CABLING OF AN TF-10 DISPLAY
Outdoor plugs and sockets for TF-10 tiles
Barco uses special designed outdoor sockets for power and data connections from tile to tile and to other peripherals. These rugged
sockets are watertight (IP65) when used with the appropriate plugs and sealing rings. Each socket is equipped with a plug holder
clamp which, when locked, ensures the plug is completely pressed into the socket.
A B
C D
E
Image 5-1
A
Power output port.
B Power input port.
C Data output port.
D Data input port.
E Plug holder clamp.
W
ARNING
:
The outdoor input and output sockets for TF-10 tiles can only be used in conjunction with Barco’s
outdoor cables for LED-walls. Do not use any other cables than those speci fi ed.
W
ARNING
:
Dummy plugs must be placed on unused outdoor input and output sockets of TF-10 tiles and all
plug holder clamps must be locked fi rmly.
W
ARNING
:
Make sure that the connector sockets are provided with sealing rings before plugging in the power
and data cables.
Overview
• Power cabling of a TF-10 display
• Data cabling of a TF-10 display
R59770682 FIXED TF-10 DISPLAY 23/11/2011 37