Barco SLite, Service Manual

Page: 25 / 53

5. On Screen Display messages
OSD
message Description
RS232
SPEED
57600
baud
Displaying the current RS232 speed which value is set to 57600 baud.
The baud rate can be displayed on request via the XLite toolset.
RS232
SPEED
115.2
Kbaud
Displaying the current RS232 speed which value is set to 115,2 kilo baud.
The baud rate can be displayed on request via the XLite toolset.
MEAS
SYST
ALL
10
Displaying detected measurement systems: All tiles use measurement system 10.
This message can be displayed on request via the XLite toolset.
MEAS
SYST
15-
17
Displaying detected measurement systems: Different measurement system detected. Displaying minimum
and maximum measurement system.
The minimum and maximum measurement systems can be displayed on request via the XLite toolset.
ALL
CALI
DISA-
BLED
Both calibration corrections, luma (white balance) and color (RGB), are disabled.
This message is displayed each time the tile starts up and all calibrations are set to disabled.
COLOR
CALI
DISA-
BLED
Color (RGB) calibration correction is disabled.
This message is displayed each time the tile starts up and only the color calibration is set to disabled.
COLOR
CALI
DON’T
EXIST
Color calibration correction does not exist.
This message is displayed each time the tile starts up and all calibrations are set to enabled, but no correction
values are found for color calibration.
CALI
ONLY
LUMA
Displaying calibration status: Only luma (white balance) correction enabled
Calibration status can be displayed on request via the XLite toolset.
CALI
LUMA
NOCOL
EXIST
Displaying calibration status: Both corrections, luma (white balance) and color (RGB), are enabled. But
no correction values are found for color calibration.
Calibration status can be displayed on request via the XLite toolset.
CALI
DISA-
BLED
Displaying calibration status: Both calibration corrections, luma (white balance) and color (RGB), are disabled.
Calibration status can be displayed on request via the XLite toolset.
CALI
FULL
LEDB.
BASED
Displaying calibration status: Both corrections, luma (white balance) and color (RGB), are enabled. The color
corrections are calculated with the LED-board measurements.
Calibration status can be displayed on request via the XLite toolset.
R5976621 SLITE DISPLAY 02/09/2005 21