![background image](http://html1.mh-extra.com/html/barco/sim-7c-r9011206/sim-7c-r9011206_service-manual_4251509021.webp)
4. Covers
4.4
Side
fi
lter cover
Overview
•
•
Description
The
side
fi
lter cover
is used to
fi
x the side dust
fi
lter in its housing.
4.4.1
Removing the side
fi
lter cover
Necessary tools
Torx screwdriver T10
How to remove the side
fi
lter cover?
1. See the procedure:
Removing the side
fi
lter
4.4.2
Installing the side
fi
lter cover
Necessary tools
Torx screwdriver T10
How to install the side
fi
lter cover?
1. See the procedure:
Mounting the side
fi
lter
4.5
Lamp cover
Overview
•
•
Description
The
lamp cover
is used to protect the lamp and to prevent the light from escaping the projector housing.
4.5.1
Removing the lamp cover
Necessary tools
Torx screwdriver T10
How to remove the lamp cover?
1. Remove the 3
fi
xing screws
Tip:
The screws are no-loss screws and will not drop.
Image 4-11
Lamp cover:
fi
xing screws
2. Slide lamp cover to the rear side of the projector and then down to release it
R59770119 SIM 7C 28/05/2008
17
Summary of Contents for SIM 7C R9011206
