![background image](http://html1.mh-extra.com/html/barco/sim-7c-r9011206/sim-7c-r9011206_service-manual_4251509022.webp)
4. Covers
Image 4-12
Lamp cover: removing
3. Remove the lamp cover
Image 4-13
Lamp cover: removed
4.5.2
Installing the lamp cover
Necessary tools
Torx screwdriver T10
How to install the lamp cover?
1. Put the lamp cover in the right position
2. Slide the lamp cover upward and to the front side of the projector (1)
Note:
If the top-right cover is already installed, the joggles of the lamp cover must slide behind it (2).
Image 4-14
Lamp cover: slide it in its correct position
3. Tighten the 3
fi
xing screws
18
R59770119 SIM 7C 28/05/2008
Summary of Contents for SIM 7C R9011206
