![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629225.webp)
7. System Setup
7.2
System setup sequence
Set up from A to Z
This section provides a top level view of the entire Event Master series processor setup procedure, plus links to each individual
sequence.
For the optimum Event Master series processor setup, it is recommended that you follow all procedures in
the order outlined below.
Set up from A to Z
1.
Power up and Status check
. For more information see section "Power up and Status check", page 222.
2.
Return to factory default
. For more information see section"Return to factory default", page 223.
3.
Communication setup
allows setup to the Ethernet settings. For more information see section"Communication setup", page
4.
Restoring the system
procedure restores the system to a previously saved con
fi
guration from a USB drive. For more information
see section "Restoring the system", page 225.
5.
User preference setup
is used to set a variety of important user preferences. For more information see section "User preference
6.
Saving the setup
procedure saves all system setup parameters. For more information see section"Saving the setup", page 227.
7.
Backing up the system
procedure backs up your system con
fi
guration to a USB drive. For more information see section"Backing
8.
Con
fi
guring Menu > Initial Setup
. For more information see section "Con
guration Menu > Initial Setup ", page 229.
9.
Con
fi
guring Menu > Add Background(s)
. For more information see section "Con
guration Menu > Add Background(s)", page
10.
Con
fi
guring Menu > Add Inputs
. For more information see section "Con
guration Menu > Add Inputs", page 231.
11.
Con
fi
guring Menu > Add Outputs
. For more information see section "Con
guration Menu > Add Outputs", page 233.
12.
Con
fi
guring Menu > Add Screen Destinations & Layers
. For more information see section "Con
Destinations & Layers", page 236.
13.
Con
fi
guration Menu > Layer optimization
. For more information see section "Con
guration Menu > Layer optimization", page
14.
Con
fi
guring Menu > Add Aux Destinations
. For more information see section "Con
guration Menu > Add Aux Destinations",
15.
Con
fi
guring Menu > Add MVR Outputs
. For more information see section "Con
guration Menu > Add MVR Outputs", page
16.
Programming Menu > Capture Stillstore from Inputs & Backgrounds
. For more information see section "Programming Menu
> Capture Stillstore from Inputs & Backgrounds", page 244.
17.
Programming Menu > Select Thumbnails for Backgrounds
. For more information see section "Programming Menu > Select
Thumbnails for Backgrounds", page 245.
18.
Programming Menu > Select Thumbnails for Inputs
. For more information see section "Programming Menu > Select Thumb-
19.
Programming Menu > Create Sources from Inputs
. For more information see section "Programming Menu > Create Sources
20.
Programming Menu > Drop backgrounds into Screen Destinations
. For more information see section "Programming Menu
> Drop backgrounds into Screen Destinations", page 248.
21.
Programming Menu > Drop Layers into Screen Destinations & Sources into layers
. For more information see section
"Programming Menu > Drop Sources, Layers into Screen Destinations & Sources into layers", page 249.
22.
Programming Menu > Drop Inputs to Aux Destinations
. For more information see section "Programming Menu > Drop Inputs
to Aux Destinations", page 251.
23.
Programming Menu > Presets And User Keys
. For more information see section "Programming Menu > Presets And User
24.
Programming Menu > Destination Transition
. For more information see section "Programming Menu > Destination Transition",
25.
Multiviewer Menu > Drop Inputs, Backgrounds and Destinations
. For more information see section "Multiviewer Menu >
Drop Inputs, Backgrounds and Destinations ", page 254.
R5905948 EVENT MASTER DEVICES 17/07/2017
221
Summary of Contents for S3 series
