![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629226.webp)
7. System Setup
7.3
Power up and Status check
General
Use the following steps to power up your Event Master series processor and check system status.
Prerequisite
•
Ensure that your system is properly installed and cabled.
•
Ensure that you are familiar with the
System Menu
. For details on all menus, please refer to chapter "Front Panel Menu
Power up system and check system status
1. Turn on the unit and wait while it initializes. During the initialization process the front panel displays: “Program Loading Please
Wait”.
The
Status
Menu is automatically displayed after initialization is completed.
2. Power up all peripherals, such as display devices (projectors, monitors) and sources.
3. Turn on the PC and run the Event Master Toolset Software.
The system con
fi
guration page is the
fi
rst page that appears when the Event Master Toolset Software is launched.
4. On the
Status
Menu:
-
System1
is the default value displayed as System Name if this is the
fi
rst start of the unit. This name can be changed in the
con
fi
guration page of the GUI.
-
Ensure the Event Master series processor is connected on the local network. If there is no internet connection, or if a DHCP
server has not been found, the IP address is 000.000.000.000. In this case, re-check all Ethernet connections. After checking
connections, if devices still report “Not Connected,” use the procedure "Communication setup", page 224.
222
R5905948 EVENT MASTER DEVICES 17/07/2017
Summary of Contents for S3 series
