Barco RLM W6, Service Manual

Page: 33 / 133

- 33 -
Table : Barco IR Codes & Keynames
No. Code 1 Code 2 RS232 Keyname Remote
Button
Description
0-16 0x8D 0xCD src.3 Switch the active source to source 3.
0-17 0x8E 0xCE
src.4
Switch the active source to source 4.
0-18 0x8F 0xCF
src.5
Switch the active source to source 5.
0-19 0x93 0xD3
saturat
Switch to the next color sturation mode.
0-20 0x98 0xD8
pause
Switch the pause key.
0-21 0x99 0xD9
text
Switch the text on/off mode.
0-22 0x9A 0xDA auto.img Switch the auto image key.
0-23 0x9D 0xDD
asp.sw
Switch to the next aspect ratio.
0-24 0xA3 0xE3 pip.sw Switch to next “PIP Select” state.
0-25 0xAA 0xEA
pip.swap
Swap the PIP image with the active
source image.
0-26 0xAD 0xED address Activates remote backlighting only
when pressed momentarily. When held
for 5 seconds or more the IR code for
toggling the projector IO light will be
transmitted.
P AUSE
AUTO IMAGE
COLOR
ADDRESS
TEXT