Barco RLM W Series Reference Manual Download Page 82

Page: 82 / 151

7. Alignments

Image 7-6
Gamma adjustment

Adjusting via dragging

1. Click on the slider bar of the gamma adjustment and hold down the mouse button.

2. Move the slider until the desired value is reached.

The value in the input

eld of the spin box will change accordingly.

Adjusting via the up down controls

1. Click on the up down control of the spin box of the gamma adjustment until the desired value is reached.

The value in the input

eld change accordingly.

Adjusting via the input

eld

1. Click inside the input

eld of the spin box of the gamma adjustment.

2. Select the actual value and enter a new value with the keyboard.

7.4

Horizontal keystone correction

What can be done ?

The horizontal keystone correction is used to align the image if the projector is mounted at a non standard
projection angle.

Image 7-7
Horizontal keystone

Keystone adjustment with positive values

Keystone adjustment with negative values

For RLM W8, horizontal keystone correction is blanked out when Advanced warping is
activated.

R59770513 RLM W-SERIES 28/07/2010

Summary of Contents for RLM W Series
























































































































































Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands

Barco RLM W Series, Reference Manual

Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands