Barco RLM W Series Reference Manual Download Page 107

Page: 107 / 151

12. Warping

12. WARPING

Overview

•

Warping method selection

•

Normal warping

•

Advanced Warping

•

Con

gurator, Warp User Interface

12.1 Warping method selection

What can be done ?

It is possible to make the selection between Normal warping and Advanced warping.

Normal warping can contain one of the following items:
•

Keystone correction

•

Rotation/PinBarrel

•

Blanking/Scenergix/Corner

Switching one to the other can be done via Reset all.

Advanced warping is done via a warp ui which makes it possible to adjust almost every single point on
the screen.

How to select

1. Click on

Warping

tab (1). (image 12-1)

The warp window opens with 2 possible choices.

2. Click on the button of your choice (2).

The following choices are possible:
- Normal warping
- Advanced warping

Image 12-1
Warping method selection

R59770513 RLM W-SERIES 28/07/2010

103

Summary of Contents for RLM W Series
























































































































































Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands

Barco RLM W Series, Reference Manual

Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands