Barco RLM G5 Performer, Service Manual

Page: 44 / 114

8. Module/Unit Identification
Unit / Board Description Partnumber
A
Cooling lamp burner top Part of kit B401042K
B Cooling lamp burner bottom Part of kit B401042K
C Cooling lamp Part of kit B401042K
D Exhaust Fan Part of kit B401042K
E Lamp unit kit R9841880
8.6 IR Receiver Front
8.6.1 IR Receiver Front swapping
How to swap the IR Receiver front
To access the IR Receiver front, the engine and the lens holder have to be removed.
1. Disconnect the IR Receiver board. (image 8-23)
2. Remove the 2 screws securing the board to front cover.
3. Remove the board.
2
1
A
Image 8-23
IR Receiver removal
8.7 Motor/Control Board
8.7.1 Motor/Control board swapping
How to remove the motor-control board
To access the motor control board, only the top cover of the projector has to be removed.
1. Remove the 2 screws (1&2) , securing the board on top and bottom. (image 8-24)
2. Slide the motor control board out the board slots (A&B) to remove (image 8-24).
3. Pull out all the plugs to allow board swapping (Order No kit: B401032K ).
R5976766 RLM G5 22/04/2004 35