Barco R9841550, Installation Manual

Page: 21 / 23

7. Additional operations
7. ADDITIONAL OPERATIONS
7.1 Reset Lamp Run time
Resetting the lamp run time
Reset lamp run time is only allowed when a new lamp is installed.
How to reset the lamp run time ?
1. Start up the projector.
2. Enter the adjustment mode by pushing ENTER .
3. Push the cursor key
↑
or
↓
to highlight Service . (menu 7-1)
4. Press ENTER to select
5. Push the cursor key
↑
or
↓
to highlight Reset Lamp Runtime . (menu 7-2)
6. Press ENTER .
The following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel. If you are not qualified, press EXIT to
cancel the reset operation. (menu 7-3)
7. Enter the serial number of the new lamp with the digit keys on the RCU. Start with 0 and continue with the number previously
written down. see Partslist of the Kit, page 3 (menu 7-4)
8. Press ENTER to continue.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-1
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-2
WARNING
---------------------
RISK OF
ELECTRICAL SHOCK
---------------------
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-3
RESET LAMP RUNTIME
Enter the serial number
of the new lamp:
xxxxxxx
<ENTER> to accept
<EXIT> to return
Menu 7-4
7.2 Cleaning the dust filters
Necessary tools
a flat screwdriver 5 mm.
How to clean the dust filters ?
1. Turn the projector upside down.
2. Turn out the 2 fixation screws of both dust filters. (image 7-1, image 7-2)
3. Clean the dust filter with a dry cloth.
4. Re-insert the dust filter.
5. Secure their position by insertion and tightening 2 fixation screws.
R5976452 UNIVERSAL LAMP KIT FOR 6000 SERIES LCD PROJECTORS 15032002 15