R5975765 RCVDS05 020997
44
R5975765 RCVDS05 020997
44
INSTALLATION
INSTALLATION
a 4-wire coaxial cable with 4 pin plugs.
Connect the Red, Green, Blue, H/S sync and V sync outputs of the RCVDS05 to the
Red, Green, Blue, H/S sync and V sync inputs of the display using coaxial cable with
BNC connectors.
E.3.2. RCVDS05 to AUDIO AMPLIFIER.
Connect the left and right audio outputs (connectors below the output moduel) of the
RCVDS05 to the left and right audio inputs of an audio amplifier using two conductor
audio cables with RCA (cinch) connectors.
E.4. Using multiple RCVDS05's with one central computer.
E.4.1. Communication linking between multiple RCVDS05's.
Plug the female D9 connector of a communication cable into the male D9 connector
labelled "to next device" on the communication interface module of the first RCVDS05.
Plug the male D9 connector of the communication cable into the female D9
connector, labelled "to host" on the communication interface module of the second
RCVDS05.
If more RCVDS's are linked, repeat above both steps.
On each RCVDS05, a unique address must be installed and each RCVDS05 must
be controlled separately by the central computer. There is no communication
between the RCVDS's.
E.4.2. Signal connection between multiple RCVDS05's to one Display.
See installation diagram on next page.
Each RCVDS05 in the link must be equipped with an expansion module, except the
last one. This expansion module is considered by the computer as an input module.
Example : 4 RCVDS's linked together, the first 3 RCVDS's needed an expansion
module.
The expansion module must be inserted in the last free slot of each RCVDS05.
Never insert an input module on the right hand side of the expansion module.
The signal connection between two RCVDS's happens on 5 coaxial cables with BNC
connectors.
Connect 5 coaxial cables between the BNC connectors of the expansion module of
the first RCVDS and the output module of the second RCVDS.
The output module of the second RCVDS can be :
- a standard output module
or
- a 5 cable output module (optional).
Connect an audio cable between the audio connectors below the output module of
INSTALLATION
INSTALLATION
a 4-wire coaxial cable with 4 pin plugs.
Connect the Red, Green, Blue, H/S sync and V sync outputs of the RCVDS05 to the
Red, Green, Blue, H/S sync and V sync inputs of the display using coaxial cable with
BNC connectors.
E.3.2. RCVDS05 to AUDIO AMPLIFIER.
Connect the left and right audio outputs (connectors below the output moduel) of the
RCVDS05 to the left and right audio inputs of an audio amplifier using two conductor
audio cables with RCA (cinch) connectors.
E.4. Using multiple RCVDS05's with one central computer.
E.4.1. Communication linking between multiple RCVDS05's.
Plug the female D9 connector of a communication cable into the male D9 connector
labelled "to next device" on the communication interface module of the first RCVDS05.
Plug the male D9 connector of the communication cable into the female D9
connector, labelled "to host" on the communication interface module of the second
RCVDS05.
If more RCVDS's are linked, repeat above both steps.
On each RCVDS05, a unique address must be installed and each RCVDS05 must
be controlled separately by the central computer. There is no communication
between the RCVDS's.
E.4.2. Signal connection between multiple RCVDS05's to one Display.
See installation diagram on next page.
Each RCVDS05 in the link must be equipped with an expansion module, except the
last one. This expansion module is considered by the computer as an input module.
Example : 4 RCVDS's linked together, the first 3 RCVDS's needed an expansion
module.
The expansion module must be inserted in the last free slot of each RCVDS05.
Never insert an input module on the right hand side of the expansion module.
The signal connection between two RCVDS's happens on 5 coaxial cables with BNC
connectors.
Connect 5 coaxial cables between the BNC connectors of the expansion module of
the first RCVDS and the output module of the second RCVDS.
The output module of the second RCVDS can be :
- a standard output module
or
- a 5 cable output module (optional).
Connect an audio cable between the audio connectors below the output module of
