Barco R9040014, Installation Manual

Page: 35 / 48

Installation Adjustment Mode
7-3
5976257 BARCOREALITY 909 16032001
2
On the screen, a drawing (Projection distance 1 Menu) will be displayed together with parameters indicating a correct position.
To change the screen width (see flowchart above) :
1 Push the cursor key ç or è to highlight the item SW in the "Projector distance 1" menu and then press TEXT . If ENTER
is pressed, the "Optical Lens Focusing" will be displayed.
If EXIT is pressed, the projector will return to the previous menu.
2 After TEXT is pressed, the next menu "Projector distance 2" will be displayed on the screen. It allows the user to change
the Screen width.
3 Push the cursor key ç or è to highlight the digit needed to be changed, and enter the desired digit with the numeric
keys on the RCU or the local keypad.
4 Press ENTER to confirm the changes. The projector will redisplay the "Projector distance 1" menu with updated values
for the three parameters.
5 Press ENTER to continue with the "Optical Lens Focusing".
If EXIT is pressed, the projector will return to the previous menu.
The same applies to the PD (projector distance). You can use the above-mentioned procedure to obtain a correct updated
value of SW (screenwidth) after entering a new value of PD (projector distance).
Projector Distance
SCREENWIDTH = 2 , 6 0 m
Select with arrow keys; reprogram with numeric keys and
then <ENTER> to confirm.
Maximum screenwidth = 6 m
Maximum proj. distance = 8,1 m.
Projection distance 1 Menu
Projection distance 2 Menu
Flowchart 2
PROJECTOR DISTANCE
PROJECTOR DISTANCE 1
"
3'
6:
$
PD/ SW/ A
PROJECTOR DISTANCE 2
"
"
7(;7
(;,7
(17(5
OPTICAL LENS FOCUSING
(;,7
(17(5
A
PD
B
screen
projector
ceiling
A = C o r r e c t io n v a lu e
P D = P e r p e n d ic u la r d is ta n c e b e t w e e n s c r e e n a n d
p r o je c t o r
S W = S c r e e n w i d t h
PD=3.64m A=12cm
6: P
Select with arrow keys; <TEXT> to reprogram
<ENTER> to continue; <EXIT> to return.
WARNING: ONLY FOR STANDARD PROJECTORS!!