Barco R9040014, Installation Manual

Page: 13 / 48

Installation guidelines
3-3
5976257 BARCOREALITY 909 16032001
Projector Configuration
Which configuration can be used.
The projector can be installed to project images in four different configurations (image 1):
rear/ceiling,
rear/table,
front/ceiling or
front/table.
image 1
Positioning the Projector
The projector should be installed perpendicular with the screen on a distance PD and water leveled in both directions.
The mounting positions shown in following images are shown for a nominal lens position.
Definitions of the Abbreviation on drawings
B = Distance between ceiling and top of the screen or between floor and bottom of the screen.
A = Distance from the middle of the lens (in nominal position) to bottom side of the projector.
CD = Total distance between projector and ceiling or projector and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and projector.
Rear/Ceiling Rear/Table
Front/Ceiling
Front/Table
Screen
PD
B
Floor
Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
TOP VIEW
SW
Floor
Table/Top side facing ceiling
A
CD = SH/2 + B - A
Screen
PD
B
Ceiling
Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
CEILING VIEW
SW
Ceiling
Ceiling/Top side facing floor
A
CD = SH/2 + B - A