R5975809 BARCO CINE 6 ___________________________________________________________________________________
6-3
Random Access Adjustment Mode
Gamma
The
GAMMA
adjust function acts on the luminance content of the image. It has
a non-linear amplification characteristic. At minimum Gamma ( < 1 ), the lower
parts of the signal are amplified with higher gain.
COLOR BALANCE
FIXED COLOR BALANCE
3200 5400 6500 9300
CUSTOM WHITE BALANCE
RED & BLUE GREEN
CUSTOM BLACK BALANCE
RED & BLUE GREEN
Select with arrow keys,
then <ENTER>,
you can adjust red with or
and blue with or
Select with
or
PICTURE TUNING
COLOR BALANCE
GAMMA
<ENTER> to accept
<EXIT> to return
Custom Color Balance :
Select Custom White balance with the arrow keys and press
ENTER
to start the
adjustment.
Use the up and down arrow keys to adjust the RED gain or the left and right
arrow keys to adjust the BLUE gain.
A bar scale indicates the amount of adjustment. Same for GREEN.
Select Custom Black balance with the arrow keys and press
ENTER
to start the
adjustment.
Use the up and down arrow keys for RED or left and right arrow keys for the
BLUE cutoff. Same for Green.
When the color balance is adjusted, press
EXIT
to return to the
PICTURE TUNING
menu.
Color Balance
The Color Balance function is used to select or adjust the color temperature
of white used by the projector.
The color balance can be adjusted in two different ways :
-
fixed color balance. You have the choice between 3200K (reddish),
5400K, 6500K (white), or 9300K (bluish).
-
custom white and black balance.
Fixed Color Balance :
Highlight one of the 4 preprogrammed values with the arrow keys and
press
ENTER
to apply.
Select with
or
PICTURE TUNING
COLOR BALANCE
GAMMA
<ENTER> to accept
<EXIT> to return
ENTER
will toggle Decodeing between EBU and IRE
EXIT
will return to the Random Access Adjustment Menu
Decoding
Only for NTSC signals.
Highlight '
DECODING
' with the arrow keys. Pressing
ENTER
will toggle between
EBU and IRE standards.
<EXIT> to return
then <ENTER>
or
Select with
PICTURE TUNING
GAMMA
COLOR BALANCE
DECODING :
ENTER
will toggle PORT 2 between S-Video & Video
EXIT
will return to the Random Access Adjustment Menu
PORT 2 : S-Video
Port 2 can be used as a Video or S-Video input.
When connected to a S-Video this menu will appear automatically. Pressing enter
will toggle between S-Video & Video.
Toggling this to video will give a monocrome picture. Toggling to S-Video will again
give a color picture.
PICTURE TUNING
COLOR BALANCE
GAMMA
PORT 2 : S - VIDEO
<ENTER> to accept
<EXIT> to return
Select with
or
ENTER
will select the GAMMA function
EXIT
will return to the Random Access Adjustment Menu
Summary of Contents for R9002370
Page 1: ...R9002370 R9002379 OWNER S MANUAL CINE 6...
Page 2: ......