Barco R9002370, Owner'S Manual, Page: 25 / 61

Start Up of the Adjustment Mode
R5975809 BARCO CINE 6 ___________________________________________________________________________________ 5-1
GENERAL ACCESS
5 6
3 4
1 2
Enter ADJUST
Select with
or
then <ENTER>
<EXIT> to return
BRIGHTNESS
CONTRAST
Adjustment mode
All picture geometry and convergence adjustments are made while in the ADJUSTMENT MODE .
There are two possible ways to enter the ADJUSTMENT MODE :
a. Using the local keypad :
Press the ADJUST key. The projector displays the GENERAL ACCESS menu.
Highlight ENTER ADJUST and press ENTER to display the MAIN MENU. Press ENTER twice.
While in the ADJUSTMENT MODE , the arrow keys (RCU) or the control keys (local keypad) can be used to make menu selections
and also horizontal and vertical adjustments. The ENTER and EXIT keys can be used to move forward and backwards through
the menu structure. The ADJUST key can be used to terminate the Adjustment Mode.
There are four possible paths to follow in the Adjustment Mode :
GUIDED - Guided should be selected if the user intends to perform a complete alignment of the projected image. All
the necessary geometry and convergence adjustments are made in a predetermined sequence.
RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments.
INSTALLATION - Installation should be selected if the projector has been relocated and/or a different screen size is desired.
When selecting 'Installation', the user will be warned to call a qualified technician to perform the installation
procedure.
SERVICE - Service should be selected if the user wants to delete or modify memory blocks, change password or apply
information. While in Guided or Random Access adjustment mode, the user may use an external source, an
internally generated genlocked pattern or an internally generated multifrequency cross hatch pattern, as a
set-up pattern.
Some items in the Adjustment mode are password protected. while selecting such an item, the projector asks you to enter your
password. (Password protection is only available when the Password strap on the controller module is in the ON position. Contact
a BARCO authorized technician when no password is requested during the adjustment procedure and password protection is
desired.)
Your password contains 4 digits.
START UP OF THE ADJUSTMENT MODE
5
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return.
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following service menus are
reserved to, and to be performed
only by qualified personnel !
If qualified, press <ENTER> to
continue, or if not, <EXIT> to
return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.