Location and Functions of Control
2-2
5975839 BARCOREALITY 812HS 100299
Important : projector ("Operational" or "Standby") mode is defined during the installation of the projector. (Refer to a qualified
technician for change).
Depending on the hardware set-up of the projector during installation, the projector switches to
Standby
or to
Operational'
mode
.
If in standby, the standby LED lights up.
12
IR Sensor
Receiver for control signals transmitted from the RCU.
13
RS 232 Output Port
RS 232 Input Port allows a communication link for PC or MAC to the next projector in a series of projector.
14
RS 232 Input Port
Connection between the projector and an IBM PC (or compatible) or MAC (RS422) for remote computer control and data communication.
CONTROL PANEL TERMINOLOGY
a. Gaining access to the keyboard
The local keypath is mounted on the top plate of the electronic box.
b. RCU control panel
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation and set-up. It includes automatic storing of :
- Picture controls (Brightness, Sharpness,....)
- Picture geometry adjustments
- Convergence adjustments
Other functions of the remote control are:
- Switching between standby and operational modes
- Switching to "pause" (blanked picture, full power for
immediate restarting)
- Direct access to all connected sources
- Variable adjustment speed : when pushing continuously on the control stick or the picture keys, the adjustment will be
executed in an accelerated fashion.
