Service Mode
10-5
5975958 RETRO GRAPHICS 2100 210198
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUN TIME
LAMP RUN TIME HISTORY
MORE ...
Reset Lamp Run Time
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pressing the control disc for-
wards or backwards and press
ENTER
to select.
When Reset Lamp Run Time is selected in the Service Mode
selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel.
If you are not qualified, press
EXIT
to cancel the reset operation.
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
LAMP RESET RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp
Run Time History by pressing the control disc forwards or back-
wards and press
ENTER
.
ENTER
displays the Lamp Run Time History menu.
EXIT
returns to the adjustment selection menu.
A listing with the lamp serial number and the corresponding run
count will be displayed.
The actual installed lamp will be marked.
Press
EXIT
to return to the service mode selection menu.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD CHANGE
LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUN TIME
LAMP RUN TIME HISTORY
MORE ...
LAMP RUN TIME HISTORY
Serial No
Run count
-----------------------------------------------------
>
0111121
600
0110031
750
0110010
745
-----------------------------------------------------
<EXIT> to return
Barco Logo
Highlight the 'BARCO LOGO' by pressing the control disc forwards
or backwards in the Service menu and press
ENTER
to select.
Select between the four options available for preferred alteration,
using the control disc's up/down selectors:
Status [off/on]
- Highlight and then press
ENTER
to toggle between
OFF/ON, displays or hides the BARCO logo on screen.
Background [off/on]
- Highlight and then press
ENTER
to toggle
between OFF/ON, to select or de-select a background behind the
Barco logo (only visible if an input source is being displayed)
Shift
- Highlight and then press
ENTER.
Moves the BARCO logo
around the screen using the control disc key, to a user defined
location.
Hot key [off/<TEXT>]
- Highlight and then press
ENTER
to toggle
between OFF/TEXT, pressing the 'TEXT' key will display or hide the
Barco Logo (only when the Status [off/on] is in the 'ON' position)
Press
EXIT
to return to the service mode selection menu.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
60Hz TRACKING
I²C DIAGNOSIS
LAMP DRIVE MODE
MORE...
BARCO LOGO
STATUS [OFF]
BACKGROUND [OFF]
SHIFT
HOT KEY [OFF]
Select with or
<ENTER> to toggle/select
<EXIT> to return.
