Barco R9001260, Owner'S Manual

Page: 46 / 55

Service Mode
10-4 5975128 BARCODATA 8200 221297
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pushing the control disc up or down
and press ENTER to select.
When Reset Lamp Run Time is selected in the Service Mode selection
menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel.
If you are not qualified, press EXIT to cancel the reset operation.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER : NORMINAL
BARCO LOGO
MORE
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp Run
Time History by pushing the control disc up or down and press
ENTER .
A listing with the lamp serial number and the corresponding run time
will be displayed.
The actual installed lamp will be marked.
Press EXIT to return to the service mode selection menu.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER : [NORMINAL]
BARCO LOGO
MORE...
LAMP RUNTIME HISTORY
Serial No Runtime
-----------------------------------------------------
> 0111121 600 h
0110031 980 h
0110010 1000 h
0000000 00 h
0000000 00 h
0000000 00 h
-----------------------------------------------------
<EXIT> to return
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP POWER [NORMINAL]
BARCO LOGO
MORE...
Lamp Power Mode
The lamp can be driven in two different modes : NORMINAL or BOOST.
Highlight Lamp Power by pushing the control disc up or down to select
the Lamp Power.
Press ENTER to toggle between NORMINAL and BOOST.