2. Replacing the analyzer
3. Turn the locking screw 1/4 turn counterclockwise to put the screw in the locked position (see the screening on the fixation plate
for the right “locked” screw position) (image 2-16)
Tip:
When the locking screw is put in the “locked” position, the cube is pushed along the reference ridge in the right position.
4. Place and lock the flat cables
5. Place the X-Cube fixation plate and tighten the screws in the order 1...4 (see the screening on the plate)
Image 2-15
Image 2-16
10
R5976879 ANALYZER KIT FOR ICON 03/03/2005
