BARCO 7
Projection Systems
Removing the X-CUBE+LCD Unit
What has to be
done
The X-Cube+LCD unit has to be taken out of the projector.
Necessary Tools
Screwdriver 8 mm.
Electrical
disconnection of
the X-Cube.
Before removing the X-Cube, it must be electrically disconnected from the driver board.
Follow the next procedure:
1
2
3
Press very carefully on both sides of the
cable lock to unlock.
Pull out the cable.
Disconnect the power connection on top of
the Analog Buffer.
Step
Action
Illustration
Press to lock
Press to unlock
Connector
connector
cable
Necessary Parts
None
Illustration
Cable connectors
Removing the X-
Cube+BufferUnit
To remove the LCD + X-cube unit together with the Analog Buffer unit, follow the next
procedure:
1
2
1
1
Loosen both fixation screws on the base of the X-cube
using a Philips screwdriver with a shaft of minimum 150
mm.
Take out the unit from the main frame very carefully.
Step
Action
Image
Power connector