BARCO 3
Projection Systems
Safety
Who
This procedure is intended for use only by qualified service technicians who have been
trained and authorized by BARCO !
Hot Surface
Switch the projector to stand by and let it cool down for at least 15 minutes before
starting with the LCD + X-Cube replacement.
Risk of Electrical
Shock
Power down the projector and unplug the power cord from the wall outlet.
Once the projector is cooled down and the power is off, continue with the replacement
procedure.
Antistatic
Protection Steps
Wear a wrist band which is connected to the ground while handling the static sensitive
parts.
Sensitive Device
LCD panels are very sensitive devices. Observe full precautions for handling electro-
static devices. Do not touch the glass surface. Hold only by the surrounding metal
parts.
Contents
Safety ................................................................................................................................... 3
Access to the X-CUBE+LCD unit ...................................................................................... 5
Removing the X-CUBE+LCD Unit ..................................................................................... 7
Disassembling the X-CUBE+LCD Unit ............................................................................. 8
Disassembling the X-CUBE+LCD Unit (Continued) ....................................................... 9
Assembling the X-CUBE+LCD Unit ................................................................................ 10
Assembling the X-CUBE+LCD Unit (Continued) .......................................................... 11
Mounting the X-CUBE+LCD unit..................................................................................... 12
Re-installing the covers and the lens ............................................................................ 13
