BARCO 12
Projection Systems
Mounting the X-CUBE+LCD unit
What has to be
done
The X-Cube+LCD unit has to be mounted in the projector.
Necessary Tools
Screwdriver 5 mm.
Mounting the X-
Cube+LCD
1
2
1
1
Slide the X-cube+LCD unit into the projector very carefully,
facing its frontside (no panel) to the lens opening.
Secure the postion of the X-Cube+LCD on the base with
the 2 screws of the removed one. Use a flat screwdriver
with a shaft of 150mm to tighten the screws.
Step
Action
Image
To mount the X-cube+LCD unit, follow the next procedure:
Electrical
Connection of the
X-Cube.
Mounting the X-Cube+LCD unit, it must be electrically connected to the driver board
and to the power. Follow the next procedure:
1
2
3
Insert the cable into the connector.
Press very carefully on both sides of the
cable lock to lock.
Insert the power connector.
Step
Action
Illustration
Press to lock
Press to unlock
Connector
connector
cable
Illustration
Frontside X-Cube+LCD
Cable connectors
