![background image](http://html1.mh-extra.com/html/barco/r5976907-00/r5976907-00_user-manual_4236949046.webp)
11. D-Cine Premiere DP100 Info
The IP overview list will be displayed. (image 11-11)
Projector IP
IP address of built-in
Barco controller DIM-PC
.
Subnet mask
subnet mask address
Default gateway
Default gateway address (router address
DHCP
enabled : dynamic IP address used on the projector
disabled : fixed IP address used for the projector
Note
: An enabled DHCP, ALWAYS requires an installed network connection to the projector.
Without network connection, the projector goes down in network error, by which the operation
of the projector is no more guaranteed.
Image 11-10
IP projector selected
Image 11-11
IP projector overview
11.3.3 IP cinema
Use the D-Cine Communicator software to setup the IP addresses.
Overview
1. Push
IP Cinema
. (image 11-12)
The IP overview list will be displayed. (image 11-13)
Cinema IP
IP address of the
cinema processing part
in the projector
Host name
Call name for the projector. This name is associated with the IP address.
Subnet
subnet mask address
Gateway
Default gateway address (router address)
DHCP
enabled : dynamic IP address used on the projector
disabled : fixed IP address used for the projector
42
R5976907 D-CINE PREMIERE DP100 02/11/2005
Summary of Contents for R5976907/00
