6. Adjustments with the ADVANCED menu
6.19 When the projected image is distorted
What should happen:
When the projected image is distorted, carry out any of the KEYSTONE, CORNERSTONE, and CURVED mode adjustments to
correct the distortion.
When the image distorts in a trapezoid shape, use the KEYSTONE-mode adjustment. For
fi
ne adjustment of the image shape, use
the CORNERSTONE-mode adjustment. To adjust the image projected on a curved surface, use the CURVED-mode adjustment.
Every time you press the ENTER key selecting the GEOMETRY menu, the menu switches in the order of KEYSTONE, CORNER-
STONE, CURVED, INSTALLATION 1 menu, KEYSTONE....
6.19.1 Adjust using Keystone mode
What can be done?
When the image distorts in a trapezoid shape, use the KEYSTONE-mode adjustment.
How to adjust
1. Display the
INSTALLATION 1
menu.
2. Select
GEOMETRY
by pressing the
▲
or
▼
key.
3. Press the
ENTER
key.
The KEYSTONE menu appears.
: 0
: 0
KEYSTONE
KEYSTONE
SELECT : MENU
Image 6-24
4. Make adjustment using the
▲
,
▼
,
◄
, or
►
key.
Every time you press the
MENU
key, the adjustment menu changes as follows: KEYSTONE
→
RESET
→
KEYSTONE ...
KEYSTONE menu
You can correct the distortion vertically or horizontally focusing on the screen center.
In the following cases (for front projection):
Image 6-25
When you press the
◄
or
►
key in the RESET mode, the distortion correction is reset.
68
R5905597 PHXX SERIES 20/05/2014