5. Advanced menu
Item
Setting
Function
GEOMETRY
ENTER
The geometry adjustment menu is displayed.
TEST PATTERN
ENTER
The test pattern is displayed.
SPLIT (for PHWU-81B/
PHWX-81B only)
ENTER
The split screen is displayed.
PIP (for PHXG-91B only)
ENTER
The picture-in-picture (PIP) screen is displayed.
AUTO POSITION
ENTER
The auto position function is activated.
•
Regardless of the setting of LAMP MODE, the STANDARD lamp mode is activated by default whenever the projector is turned
on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about 2 minutes after turn-on.
•
When the ambient operating temperature is high, the brightness of the lamp isn’t changed by switching the lamp mode.
•
When the lamp mode is switched, the projected image may
fl
icker.
•
Frequent switching of the lamp mode may damage the lamp.
•
When using the projector for a long time, set LAMP RELAY.
•
While the lamps are being warmed up, an icon is displayed to the right of the INSTALLATION 1 menu bar. While the icon
is being displayed, you cannot set LAMP SELECT and LAMP RELAY. And an icon is displayed while the operating ambient
temperature is high. While the icon is being displayed, the lamp may not brighten even when you change the LAMP MODE to
STANDARD.
•
After you switch the lamps and the newly selected lamp turns on, you cannot turn off the projector for approx. 1 minute.
5.5
Installation 2 menu
Overview
16:10
IMAGE
INSTALL1
INSTALL2
MULTI-
SCREEN FEATURE SIGNAL NETWORK
INFO
REMOTE 1 MODE
FILTER MENU
AUTO POWER ON
AUTO POWER OFF
OFF
ON
IMAGE
AUTO
5min
IMAGE CAPTURE
SPLASH SCREEN
DVI LONG CABLE
BACK COLOR
ENTER
ENTER
SETUP
SCREEN
Image 5-15
Item
Setting
Function
AUTO POWER ON
ON / OFF
When ON is chosen, the projector is automatically turn on when the
power cord is plugged in the wall outlet. Choose ON when using the
projector mounted on the ceiling.
→
The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
AUTO POWER OFF
OFF / 5min-8hour
When no video signal is input and no operation is made, the projector
automatically turns off after the selected time period. A dialog is
displayed 5 minutes before the projector turns off.
SCREEN
16:10 (For PHWU-
81B/PHWX-81B only)
Select this setting when using a 16:10 screen.
16:9
Select this setting when using a 16:9 screen.
4:3
Select this setting when using a 4:3 screen.
IMAGE CAPTURE
SETUP
This projector does not support this function.
SPLASH SCREEN
ON
Fixed to ON.
BACK COLOR
BLUE / BLACK / IMAGE
Use to select the background from among BLUE, BLACK and IMAGE,
which will be displayed when there is no signal input from the source.
When IMAGE is selected, the splash image will be displayed.
R5905597 PHXX SERIES 20/05/2014
45
