Barco OV-508, Installation Manual

Page: 70 / 73

7. Wall attachment
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
________________________________ ________________________________ ________________________________________________ ________________ ________________ ________________ 65
The following pictures show a sketch of the installed wall fixation on the display wall:
Item no. quantities Description
1 2 Profile (length: project specific)
6 2 Screw M10x110
5 1 Fixation bracket display wall side
2 4 Washer U-6-125
12 4 Screw M6x40
4 1 Distance bushing
7 2 Nut M10
8 2 Washer U-10-125
To install the wall fixation at the display wall, proceed as follows:
•
Take the fixation bracket [5] and attach it to the profiles of the dark box (linear setup!!) using the screws
M6x40 [12] and the washers U-6-125 [2] (4 screws). In case of a curved setup, the center of the bracket is
fixed to the polygonal connection bracket with 2 screws.
•
Position the profiles [1] and apply the bushings [4] (either on top of the profiles as shown in the drawing, or
beneath the profiles).
•
Insert the screws M10 [6].
•
Use the washers [8] and nuts [7] to fix it.