Barco NW-12, User Manual

Page: 38 / 181

4. Installation
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting network
takes a few seconds more.
Image 4-28
4.5.10.3 RS232 communication
What is possible with the RS232 connection ?
1. Remote control :
2. Data communications: sending data to the projector or copying the data from the projector to a memory device (hard disc,
fl oppy, etc.).
How to connect the RS232 ports?
1. Connect the D9 connector from the RS232 cable to the RS Input on the projector.
DVI DVI COMPUTER COMPUTER
RS 232 C RS 232 C DVI DVI R.C. R.C.
DVI DVI COMPUTER COMPUTER
RS 232 C RS 232 C DVI DVI R.C. R.C.
R / PR R / PR G / Y G / Y B / PB B / PB Hs / Cs Hs / Cs Vs Vs VIDEO VIDEO S-VIDEO S-VIDEO R / PR R / PR
G / Y G / Y
B / PB B / PB
Hs / Cs Hs / Cs
Vs Vs
VIDEO VIDEO S-VIDEO S-VIDEO
DESKTOP INPUT DESKTOP INPUT
Image 4-29
RS232 connection
4.5.11 Multichannel Installations
Overview
• Linked CLO
• Linked Dynacolor
4.5.11.1 Linked CLO
Linking CLO in a multichannel system
The linking of the projectors to allow CLO and Dynacolor information interchange is done via the Ethernet connection.
34 R59770286 NW-12 25/09/2008