22
Nio
Stand-by switching
O
N
E-3620
AND
MDNG-5121
DISPLAYS
:
When the display is on and no on-screen display is visible, push and hold
the control wheel at the front for a few seconds to switch the display in
stand-by. The LED turns orange.
Figure 16: Location of the control wheel
When the display is in stand-by, press the control wheel to switch it back
on.
The connected power supply also provides a switch that can be
used to turn the power completely off. To use the display,
please make sure to switch on this power supply. This can be
done by pushing the on/off switch on the power supply into
the "|" position.
BARCO
Push and hold