![background image](http://html1.mh-extra.com/html/barco/medea-series/medea-series_installation-manual_4187181032.webp)
R5906141 /02
Medea series
32
4.1 Remote control, battery installation
Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a
shorter battery life time. At delivery the batteries can be found in a separated bag attached to the remote
control unit. Before using your remote control, install the batteries first.
How to install
1.
Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover
upwards (2).
1
2
Image 4-1
2.
Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery
compartment.
Tip:
Use alkaline batteries for optimum range and life time.
+
-
-
+
Image 4-2
3.
Insert (1) both lower tabs of the battery cover in the gaps at the bottom of the remote control, and press (2) the
cover until it clicks in place.
+
-
-
+
1
2
Image 4-3
When replacing batteries, the broadcast address of the RCU will be reset to its default value '0'.
Summary of Contents for Medea series
Page 1: ...ENABLING BRIGHT OUTCOMES Installation Manual Medea series...
Page 18: ...R5906141 02 Medea series 18 Safety...
Page 29: ...29 Overview Installation process projector R5906141 02 Medea series Installation process 3...
Page 56: ...R5906141 02 Medea series 56 Input Communication...