Barco Medea series, Installation Manual

Page: 41 / 74

R5906141 /02 Medea series 41
To separate the lens (reference 2) from the adapter (reference 3), first push on the button (reference 4)
situated on the adapter to release the lens mount mechanism, turn the lens to the left (CCW), then pull the
lens straight out of the adaptor.
The button (reference 4) needs to be kept pushed in until the lens has rotated about 10° with
respect to the adapter.
4
2
3
Image 5-4
The electrical connections of the lens with the projector are supplied by the two lens shift connectors
(references 5) located on front of the Lens holder. Adaptor behaves like pass through in term of electrical
connection.
5
Image 5-5
Install a standalone lens
1. Verify that the projector shutter is activated (shutter is activated when the shutter icon on the projector keypad
is red).
2. Make sure to remove all protective caps present on the lens and lens holder.
3. Align the lens in order to that the marking (red) on the bayonet is facing upwards, then insert the lens in the
projector lens holder (Image 5-6, Action arrow 1).
Lenses