Barco MDSC-8232 User Manual Download Page 54

Page: 54 / 64

K5902094 (451920611693) /02

MDSC-8232

6.7 Explanation of symbols

Symbols on the device

On the device or power supply, you may find the following symbols (nonrestrictive list):

Indicates the device meets the requirements of the applicable EC directives/
regulations.

Indicates compliance with Part 15 of the FCC rules (Class A or Class B).

E346057

Indicates the device is approved according to the UL Recognition regulations.

E346057

MEDICAL

–

GENERAL MEDICAL EQUIPMENT

AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA CAN/CSA-C22.2
NO. 60601-1:14

E346057

Indicates the device is approved according to the UL regulations for Canada and US.

Indicates the device is approved according to the UL Demko regulations.

Indicates the device is approved according to the CCC regulations.

Indicates the device is approved according to the VCCI regulations.

Indicates the device is approved according to the KC regulations.

Indicates the device is approved according to the BSMI regulations.

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Important information

Summary of Contents for MDSC-8232

































































Search results

Summary of Contents for MDSC-8232

Reviews:

Related manuals for MDSC-8232

Brands by name

Popular brands

Barco MDSC-8232, User Manual

Search results

Summary of Contents for MDSC-8232

Reviews:

Related manuals for MDSC-8232

Brands by name

Popular brands