Barco MDSC-2326 MNAH, User Manual, Page: 49 / 78

K5902135 (451920612565) /04 MDSC-2326
49
To select the 2 nd picture source
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2 nd Picture Source submenu.
4. Select one of the available 2 nd picture sources and confirm.
5.3.7 2nd Picture Position
About 2 nd picture positions
The available 2 nd picture positions for your display are:
• Top Right
• Top Left
• Bottom Right
• Bottom Left
To select the 2 nd picture position
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2 nd Picture Position submenu.
4. Select one of the available 2 nd picture positions and confirm.
5.3.8 Picture Swap
About picture swapping
To swap pictures means to exchange (swap) main and 2 nd picture.
To swap pictures
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Picture Swap submenu.
4. Select the desired setting and confirm.
5.4 Configuration menu
5.4.1 Information
About information
The available information items for your display are:
• Model (commercial type identification)
• Operating Hours (backlight operation hours)
• Firmware Release (firmware identification)
• Hardware Version (main board identification)
• Option SDI (SDI module identification)
• Serial Number: xxxxxxxxxxxx
To access information
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Information submenu.
The different information items are shown.
Advanced operation