Barco MDSC-2326 MNAH, User Manual, Page: 37 / 78

K5902135 (451920612565) /04 MDSC-2326
37
Zoom factor selection
4.8.1 Main source selection
To quickly select the main source
1. While no OSD Menu is on the screen, press the Input selection key ( ) to bring up the main source quick
selection menu.
2. Toggle the available main source options by pressing the key corresponding to the desired option.
If two options are available for one key, the first key press will select the upper option, a second press
selects the lower option.
The current selection is marked in red.
3. Press the stand-by key ( ) to confirm your choice and exit the main source quick selection menu.
Main source
VGA
DP
R G B
Y Pb Pr
S-Video
CVBS
DVI
SDI Nexxis 2nd Source
E
X
I
T
Image 4-6
4.8.2 Second source selection
To quickly select the second source
1. While no OSD Menu is on the screen, press the Input selection key ( ) to bring up the main source quick
selection menu.
2. Press the key to switch to the 2nd source quick selection menu.
3. Toggle the available second source options by pressing the key corresponding to the desired option.
If two options are available for one key, the first key press will select the upper option, a second press
selects the lower option.
The current selection is marked in red.
4. Press the stand-by key ( ) to confirm your choice and exit the second source quick selection menu.
2nd Source
VGA
DP
R G B
Y Pb Pr
S-Video
CVBS
DVI
SDI Nexxis Main source
E
X
I
T
Image 4-7
4.8.3 Multi-image configuration
To quickly select the multi-image configuration
1. While no OSD Menu is on the screen, press the PiP selection key ( ) to bring up the multi-image
configuration quick selection menu.
2. Toggle the available multi-image configurations by pressing the key corresponding to the desired option.
The current selection is marked in red.
3. Press the stand-by key ( ) to confirm your choice and exit the multi-image configuration quick selection
menu.
Daily operation