Barco MDSC-2326 MNAH, User Manual, Page: 23 / 78

K5902135 (451920612565) /04 MDSC-2326
23
3.2 Cover removal
To remove the connector compartment cover
1. Loosen the screw fixing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2 2
Image 3-3
3.3 Video input connection
About video input connections
The MDSC-2326 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See the
dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side (SbS)
functionality becomes available, allowing you to view two different video inputs at once. Please refer to the
dedicated chapter for more info on how to activate and use the PiP and SbS features on your MDSC-2326.
This chapter describes how to connect the different video input types for each version of the MDSC-2326.
3.3.1 MDSC-2326 DDI(H) version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the
appropriate video cable(s).
- DVI 1 or VGA (*): 6
- DVI 2: 1
- DisplayPort: 7
- SDI 1: 3
- SDI 2: 2
- R/G/B/S: 8/9/10/4
- R/G/B (SOG): 8/9/10
- Y/Pb/Pr: 9/10/8
- CVBS: 5
- S-Video: 11
Display installation