Barco MDSC-2326 DDIH User Manual Download Page 60

Page: 60 / 68

6. Important information

MEDICAL – GENERAL MEDICAL EQUIPMENT

AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY

IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA
CAN/CSA-C222.2 NO. 60601-1:14
Indicates the device is approved according to the UL Demko regulations

Indicates the device is approved according to the CCC regulations

Indicates the device is approved according to the VCCI regulations

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the device is approved according to the PSE regulations

Indicates the device is approved according to the RCM regulations

Caution: Federal law (United Stated of America) restricts this device to sale by
or on the order of a licensed healthcare practitioner.

Indicates the device is approved according to the BIS regulations

Indicates the USB connectors on the device

Indicates the DisplayPort connectors on the device

Indicates the legal manufacturer

Indicates the manufacturing date

K5902135 (451920612561) MDSC-2326 28/02/2017

Summary of Contents for MDSC-2326 DDIH





































































Search results

Summary of Contents for MDSC-2326 DDIH

Reviews:

Related manuals for MDSC-2326 DDIH

Brands by name

Popular brands

Barco MDSC-2326 DDIH, User Manual

Search results

Summary of Contents for MDSC-2326 DDIH

Reviews:

Related manuals for MDSC-2326 DDIH

Brands by name

Popular brands