Barco MDSC-2232 Series, User Manual

Page: 27 / 76

K5902105 (451920611795) /04 MDSC-2232
27
3.6 VESA mount installation
To install the display on a VESA mounting solution
The display can be attached to a VESA 100 mm or VESA 200 mm arm or stand.
Image 3-11
The VESA mounting holes at the back of the display are provided with M4-type blind fasteners to fix the VESA
mounting plate. Depending on the VESA plate thickness (T) and the thickness of possible washers (W), a
different screw length (L) should be selected in order to ensure the correct thread engagement (15 mm).
Please respect the following rule to select an appropriate screw length: L = 15 mm + T + W
T 15 mm
W
L
Image 3-12
CAUTION: Using the above rule, the 4 screws included (M4 x 20 mm) can be used for a VESA arm
interface with a thickness (T) of 5 mm (washers are not used in this case).
CAUTION: Use an arm that is in compliance with VESA requirements.
CAUTION: The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor (IEC60601 – 1).
Display installation