Barco MDRC-1119 TS, User Manual

Page: 45 / 66

45
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
following troubleshooting. If the problem persists, please contact your
local dealer or our service center.
Problem: No image appears on screen.

Check that all the I/O and power connectors are correctly and
well connected as described in the “Installation” section.

Make sure the pins of the connectors are not crooked or
broken
.
Problem: Partial image or incorrectly displayed image.

Check to see if the resolution of your computer is higher than
that of the LCD Display.

Reconfigure the resolution of your computer to make it less
than or equal to the native resolution MDRC-1119, MDRC-1119
TS and MDRC-1119 HB (1280 x 1024) MDRC-2120(1600 x1200)
Problem: Image has vertical flickering line bars.

Use “Clock” to make an adjustment.

Check and reconfigure the display mode of the vertical refresh
rate of your graphics card to make it compatible with the LCD
Display.