![background image](http://html1.mh-extra.com/html/barco/mdpc-8127/mdpc-8127_user-manual_3917236027.webp)
27
R5913216 /03
MDPC-8127
2.
Navigate to the
Configuration > User Interface > Controls
menu.
3.
Enter the
Power Lock
submenu.
4.
Select
Enabled/Disabled
as desired and confirm.
4.5 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic
lifetime by automatically switching off the backlight when the display is not used for a specified period of time.
By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To
do this, go to the
“
Power options
”
of your workstation.
Barco recommends setting DPMS activation after 20 minutes of non-usage.
When DPMS mode is enabled, an additional power saving function becomes available: hibernate.
See
“
”
, page 27
for more information.
To enable/disable DPMS mode on your display:
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Power Management
menu.
3.
Enter the
DPMS Mode
submenu.
4.
Select
Enabled/Disabled
as desired and confirm.
4.6 Hibernate
About hibernate
When hibernate is enabled, not only the backlight, but also other functions will be disabled to reduce power
consumption to a minimum. This happens after an adjustable period of time.
DPMS mode must be enabled before hibernate can be enabled. See
, page 27
.
Connect your keyboard, mouse, touchpad, etc. directly with your workstation (and not with the
display) to be able to awake your workstation and display from hibernate.
To enable/disable hibernate
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Power Management
menu.
3.
Enter the
Hibernate
submenu.
4.
Select
Enabled/Disabled
as desired and confirm.
To adjust the hibernate time-out
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Power Management
menu.
3.
Enter the
Hibernate Timeout
submenu.
Summary of Contents for MDPC-8127
