Barco MDMX-MNA, User Manual

Page: 26 / 40

R5913897 /00 MDMX-MNA 26
anesthesiology, patient information and other compatible medical imaging systems, and is designed to be
connected to Nexxis, Barco
’ s VoIP distribution system.
Intended usage environment
• Equipment primarily for use in a health care facility that is intended for use where contact with a patient is
unlikely (no applied part).
• The equipment shall not be used with life support equipment.
• The user should not touch the equipment, nor its signal input ports (SIP)/signal output ports (SOP) and the
patient at the same time.
Contra-indications
• This display is not intended to be used for direct diagnosis and therapeutic interventional radiology.
• The display is not intended to be used as the primary display for surgical procedures.
• The device as such is not intended to be used
-
in the vicinity of devices that emit strong magnetic fields (such as MRI) and should be used in areas
where direct contact with patients is unlikely to occur. diagnosis, monitoring, treatment, alleviation of, or
compensation for, an injury or disability
- with life-support equipment
Intended users
MDMX-MNA is intended to be used by trained medical practitioners.
Notice to the user and/or patient
Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is established.
Factory address
Barco Visual (Beijing) Electronics Co., Ltd. Suzhou Branch , Floor 4, No. 179, Suhong West Road, Suzhou
Industrial Park, 215021 Suzhou, China
Manufacturing country
The manufacturing country of the product is indicated on the product label ( “ Made in …” ).
Importers contact information
To find your local importer, contact one of Barco ’ s regional offices via the contact information provided on our
website ( www.barco.com ).
Federal Communications Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area may cause harmful interference, in which case the user will be responsible for correcting any interference
at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC responsible : Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1
678 475 8000
Canadian notice
CAN ICES-1/NMB-1
Important information