Upgrading Firmware
Remote Configuration and Control
MatrixPRO-II DVI 16x16
Quick Start Guide
AC
Connect to
AC power
source.
P/N 26-1302004-00 Rev 01
Visibly yours
Input LED
Indicates
valid input
connected
DVI Inputs
16 DDC/HDCP Compliant
DVI Inputs are provided
DVI Outputs
16 DDC/HDCP Compliant
DVI Outputs are provided
Output LEDs
Indicate valid
“Hot Plug Detect”
SDVI-4EI
CH 1
CH 2
CH 3
CH 4
1
2
3
4
SDVI-4EI
CH 1
CH 2
CH 3
CH 4
1
2
3
4
SDVI-4EI
CH 1
CH 2
CH 3
CH 4
1
2
3
4
SDVI-4EI
CH 1
CH 2
CH 3
CH 4
1
2
3
4
SDVI-4EO
CH 1
CH 2
CH 3
CH 4
1
2
3
4
CH 1
CH 2
CH 3
CH 4
1
2
3
4
CH 1
CH 2
CH 3
CH 4
1
2
3
4
CH 1
CH 2
CH 3
CH 4
1
2
3
4
SDVI-4EO
SDVI-4EO
SDVI-4EO
100-240~, 47/63Hz
PM-350
SERVICE
RS-232
LAN
REFERENCE
OUTPUT
MONITOR
OUTPUT
Power Supply Bay
For optional
Redundant Power
Supply Module.
Barco part number
R767420K
Service Port
Used to
upgrade product
firmware
RS-232 Port
Command input using
Hyper Terminal
(Default Baud Rate:
115200bps, N-8-1)
Ethernet Port
Command Input using TCP/
IP Telnet, Web Panel, or PC
Program GUI
(Default IP: 192.168.0.246)
Reference Output
Test pattern video
source
1280x1024@60Hz
Vertical Color Bars
Monitoring Output
Provides an additional
output to monitor Input
signals.
Command Input
The MP-II DVI 16x16 Router can also be controlled
using Command codes that are in an ASCII String
format. These strings can be sent to the Router
through a RS-232 or TCP/IP connection. The
commands can be found in section 7 of the User’s
Guide.
RS-232 default settings:
Bits per second (baud rate):
115200 (115200 is default baud
rate of MATRIXPRO-II DVI 16x16 )
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
IMPORTANT
For HDCP sources, ensure the Output
Display device is HDCP-compliant.
Otherwise, the display device will be
blacked when protected content is
selected to be shown on that output.
VGEXT
Product firmware updates are available on the Barco website at
www.barco.com. Go to Image Processing and then to Matrix
Switchers
The MegaBoot.exe software is used when downloading new
firmware to the MatrixPRO-II DVI Router. The software can be run
on a PC with Windows 7, as an Administrator or on a PC with
windows XP.
Connect your PC to the service port using the RJ11 to DB9 serial
download cable provided. Your PC serial COM port must be set
38400bps baud rate when performing firmware updates through the
service port.
For detailed instructions on updating the product firmware see
section 8 of the User’s Guide.
Supports Entire family of Barco Encore Controllers
4RU 19" rack mountable chassis
DDC/HDCP Compliant
Ability to Enable and Disable HDCP for each Input
Additional DDC/HDCP Compliant Monitor Output
Optional Redundant Power Supply
Features
Technical Support
(Europe, Middle East, Asia)
Telephone: 0800900410
Website: www.barco.com/support/eSupport.aspx
Technical Support (USA)
Telephone: (866) 374-7878
6 am to 10 pm (PST) 7 days/week
Websites: www.barco.com
www.barco.com/esupport
