Barco LX-5 SERIES, User Manual

Page: 18 / 52

18
Connection and Installation
Connection During Single-Screen
Mode Display
The single-screen mode displays signals (up to four signals) from a computer as a single video image.
To select to the single-screen mode, set “Display Mode” in the Setting menu to “Single”. (
A
Page 33)
Possible Input Signals and Projected Image
NOTE:
●
This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.
●
If the resolution of the PC is 2048 1200 or lower, images are displayed upon doubling the number of the vertical and
horizontal pixels.
Connecting Video
Signals of the Computer
Computer
Projector Terminal for
Connection
Output Status
Displayed
Projector Image
Resolution Channel Link Status
4096 2400
2ch Dual DVI 1, DVI 3 2 Stripes 2048 2400
4096 2400
4ch Single DVI 1 to DVI 4
Cross 2048 1200
4 Stripes 1024 2400
4096 2160
2ch Dual DVI 1, DVI 3 2 Stripes 2048 2160
4096 2160
4ch Single DVI 1 to DVI 4
Cross 2040 1080
4 Stripes 1024 2160
3840 2400
2ch Dual DVI 1, DVI 3 2 Stripes 1920 2400
3840 2400
4ch Single DVI 1 to DVI 4
Cross 1920 1200
4 Stripes 960 2400
3840 2160
2ch Dual DVI 1, DVI 3 2 Stripes 1920 2160
3840 2160
4ch Single DVI 1 to DVI 4
Cross 1920 1080
4 Stripes 960 2160
2048 1200 1ch Single DVI 1 Normal 2048 1200 4096 2400
2048 1080 1ch Single DVI 1 Normal 2048 1080 4096 2160
1920 1200 1ch Single DVI 1 Normal 1920 1200 3840 2400
1920 1080 1ch Single DVI 1 Normal 1920 1080 3840 2160
1600 1200 1ch Single DVI 1 Normal 1600 1200 3200 2400
1280 1024 1ch Single DVI 1 Normal 1280 1024 2560 2048
1024 768 1ch Single DVI 1 Normal 1024 768 2048 1536
800 600 1ch Single DVI 1 Normal 800 600 1600 1200
640 480 1ch Single DVI 1 Normal 640 480 1280 960
LX-5_EN.book Page 18 Friday, July 4, 2008 9:35 AM