Barco IOSONO ONE R9801506, Installation And User Manual

Page: 18 / 35

5. Play Config Software
5.2 Main Page
Main Page
2 3 4 5
6 7 8 9
10
12
1 11
Image 5-2
Main page of Play Con
fi g
Item No. Element Function
1 Playlist Displays content of current clip list
2 Back Switches to previous clip within the playlist
3 Play Starts the playback of the current clip. During playback the button changes to
pause button
4 Stop Stops the playback of the current clip and resets the position to the beginning
of the clip
5
Next Switches to next clip within the playlist
6 Single Mode A cued clip is played to the end, then the playback is stopped
7
Loop Mode At the end of a clip, the next clip starts. At the end of the show, the playback
starts again at the
fi rst clip
8 List Mode Consecutive playback of all clips in a cued show, at the end of a clip, the next clip
starts. After the last clip, playback is stopped
9 Chase Mode The show starts according to incoming timecode at the LTC In port. Go to Clip
List tab (see "Clip Lists Tab", page 16) to set the start time and the frame rate of
the incoming timecode
Note: Check the status page ("Status Page", page 15) to check whether timecode
is coming in and recognized correctly. Check green status LED and timestamp
10 Eject Clears the currently cued clip list
11 Clip List Table with the existing clip lists
12 Cue Select a clip list and cue into the show
The Main Page is displayed when neither the Status-Page nor Setup-Page is selected at the Navigation Bar.
14 R5906747 IOSONO ONE 16/05/2017