Barco IOSONO ONE R9801506, Installation And User Manual

Page: 9 / 35

2. Safety
2. SAFETY
About
Read this chapter thoroughly before attempting to install or operate the IOSONO ONE.
To prevent personal injury to users or physical damage to the IOSONO ONE while installing and using your IOSONO ONE, ensure
that you understand and follow all safety guidelines, instructions and warnings included in this chapter and this manual.
2.1 General Considerations
About
The IOSONO ONE is designed for installation in control cabinets.
The IOSONO ONE is a high-performance audio processor used to control and con fi gure an IOSONO sound system.
The IOSONO ONE and all associated components may only be used if they are in perfect, technical working order, and for their
intended purpose, with safety in mind and an awareness of the dangers, and as stated in this manual.
The IOSONO ONE is operated via a graphic user interface. Reference is made to the currently valid guidelines for working with a
visual display unit.
There are additional documents for other components of the sound system containing warning, safety and working instructions.
These instructions must be observed independently of this manual.
2.2 Important safety instructions
About
The IOSONO ONEoffers an extremely high level of safety if used properly and in compliance with the instructions contained in this
manual. Read and comply with the following safety instructions before operating the device. Retain safety and operating instruc-
tions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for
operation and use.
Installation
The device may only be installed and operated by authorized, suitably quali fi ed personal. More advanced con fi gurations of the
apparatus may only be made by skilled personnel with knowledge of sound technology.
Place the device on a fl at, solid and stable surface or fi x the device to an appropriate rack mounting system that can support the
total weight of the device. If you use an unstable cart or stand, the device may fall, causing serious injury to a child or adult and
serious damage to the device.
Modi fi cations to the unit
Do not modify this equipment without authorization of the manufacturer. No serviceable parts inside.
Electric shock or fi re hazard
To prevent electric shock or fi re hazard, do not remove cover. Do not insert any objects through aperture in the casing.
Power connection and transient over voltage
• To avoid the risk of electric shock, this equipment must only be connected to supply mains with protective earth.
• The equipment should be installed near an easily accessible outlet.
• The equipment is intended for continuous operation.
• If the device is not used for long time, disconnect it from the AC inlet to avoid damage by transient over-voltage.
• To fully disengage the power to the device, please disconnect all power cords from the AC inlets.
Power cords
Please always use the power cords provided with the product. Furthermore, make sure that the used power cord always corresponds
to the voltage of the power socket, is permitted to be used at your location and complies with the safety standards of your country.
Do not overload wall outlets and extension cords as this may result in
fi re or electric shock.
Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be walked upon or pinched
by items placed upon or against them, paying particular attention to cords at plugs and receptacles. The power supply cords should
be replaced by the designated operator only at all times.
R5906747 IOSONO ONE 16/05/2017 5