Barco ImagePRO-HD, Installation Manual

Page: 25 / 121

Manual # 26-0302000-00 / Revision E ImagePRO – Multi Format Image Processor
11
Video Input Connections
Universal Input Connectors
The video input section on the ImagePRO
TM
rear panel provides three universal inputs. Each input can accept RGB,
YUV, S-Video (Y/C), or composite (NTSC, PAL or SECAM) video signals. On ImagePRO
™
and ImagePRO-SDI
™
Universal Inputs 1 & 2 are provided with HD-15 female connectors. On ImagePRO-HD
™
Universal input 2 is provided
with an HD-15 connector. Universal input 1 is provided with a DVI-I connector, which can be converted to an HD-15
via the DVI-I to HD-15 adaptor provided with the unit. Universal Input 3 is provided with BNC connectors on all
models. All inputs are provided with a corresponding buffered loop-through. Connection pins for each video signal are
specified below.
RGBHV
Pin 1 RED
Pin 2 GREEN
Pin 3 BLUE
Pin 4
Pin 5
Pin 6 RED return
Pin 7 GREEN return
Pin 8 BLUE return
Pin 9
Pin 10 GND
Pin 11
Pin 12
Pin 13 Hsync or Csync
Pin 14 Vsync
Pin 15
1 5
11 15
6
HD-15 Input Connector Pinout
(as viewed from rear of unit)
Format – RGB
(Typical Devices: Computers)
Format – YUV or Y Pr Pb (Betacam)
(Typical Devices: DVD Player or Betacam Deck)
Source to ImagePRO
TM
Source to ImagePRO
TM
R R/R-Y/C Y G/Y/COMPOSITE
G G/Y/COMPOSITE Pr R/R-Y
B B/B-Y Pb B/B-Y
H
H/C or
V V Y G/Y/COMPOSITE
U R/R-Y
Format – S-Video (Y/C)
(Typical Devices: S-Video DVD or VCR)
V B/B-Y
Source to ImagePRO
TM
Format – Composite (Typical Devices: NTSC/PAL DVD or VCR)
Y G/Y/COMPOSITE Source to ImagePRO
TM
C B/B-Y NTSC/PAL/SECAM G/Y/COMPOSITE
*NOTE: Composite sync or separate Hsync and Vsync signals are accepted. Sync on Green is also supported.