manualshive.com logo in svg

Barco ImagePRO-HD, Installation Manual

Share
Download
Barco ImagePRO-HD Installation Manual Download Page 24

10  

Image

PRO – Multi Format Image Processor 

Manual # 26-0302000-00 / Revision E

 

 

Rack-Mount Installation 
 

ImagePRO

TM

 units are designed to be rack mounted and are supplied with front rack-mount hardware. Rear rack-

mount brackets are available as a kit and are recommended for use when units are mounted in transit cases. When 
rack mounting the unit, remember that the maximum ambient operating temperature for the unit is 40 degrees C. 
Leave at least one inch of space front and rear to make sure that the airflow through the fan and vent holes is not 
restricted. When installing equipment into a rack, distribute the units evenly to prevent hazardous conditions that may 
be created by uneven weight distribution. Connect the unit only to a properly rated supply circuit. Reliable grounding 
(earthing) of rack-mounted equipment should be maintained. 

Summary of Contents for ImagePRO-HD


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands