manualshive.com logo in svg

Barco ImagePRO-HD, Installation Manual

Share
Download
Barco ImagePRO-HD Installation Manual Download Page 111

 

Manual # 26-0302000-00 / Revision E 

ImagePRO – Multi Format Image Processor    97 

 

Software Upgrade Instructions  

 

 

Overview 

 

The ImagePRO units incorporate the system software in a Flash memory component. Flash memory allows easy field 
upgrades without the need to send the unit back to the factory.  
 
The loader utility provides the capability to update the system Flash module with the latest revision of software. The 
upgrade utility can be run from a hard drive (recommended) or a floppy drive. Running the loader from a floppy drive 
is discouraged though due to the slow speeds associated with disk access.  

 

Hardware Requirements 

 

* 

IBM compatible computer with an available COM port 

 
* Serial cable conforming to EIA RS-232 specifications (i.e. Standard Modem cable) 
 (The cable should have a DB-9 male connector on one end) 

 

Software Requirements 

 

* 

Windows NT/2000/XP 

 
* Flash File Loader 
 
* ImagePRO Software files 

 

The Flash File Loader with the Software files can be downloaded from our FTP site as described below. 

 

Connecting to Folsom Research 

 
Folsom Research's FTP site address is: 

ftp.folsom.com

  

 
If you are using an FTP client, logon to our site using "anonymous" for the user  
name and your email address as the password (ex. 

[email protected]

).   

However, if you are using a web browser to access our FTP site, point the browser to: 

ftp://ftp.folsom.com

.  

 

Downloading Necessary Files 

 
ImagePRO Software Files and Flash File Loader 
 
Directory Location: ftp://ftp.folsom.com\ Products \ Video \ IP2003 \  
File to download: "ImagePro_Rev#####_###.exe" 
 

Installing ImagePRO’s Software Files and Flash File Loader 

 
Before installing the files, it is recommended that all running programs be properly shut down. 
 

1.  Click on the Start button and select Run. 
2.  Click on the Browse button and locate the "ImagePro_Rev#####_###.exe" file on your hard drive. 
3.  Double click on this file and then click OK to start the installation process. 
4.  Follow the on screen instructions to complete the install. 

 

Starting the ImagePRO Flash File Loader Utility 

 
After the files have been installed the ImagePRO Flash File Loader can be selected to run. 

1.  Click on the Start button and select Programs. 

Summary of Contents for ImagePRO-HD


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands